ETC Source Four Mini LED User Manual
Hide thumbs
Also See for Source Four Mini LED:
- User manual (20 pages) ,
- Installation manual (4 pages) ,
- User manual (12 pages)
Related Manuals for ETC Source Four Mini LED
Summary of Contents for ETC Source Four Mini LED
- Page 1 Source Four Mini LED F-Drive User Manual Part Number: 7063M2130 Rev C Released: 2023-12...
- Page 2 To view a list of ETC trademarks and patents, go to etccon- nect.com/ip. All other trademarks, both marked and not marked, are the property of their respective owners. For a complete list of all third-party licenses that are fully incor- porated herein to the extent required by each third-party license terms and conditions, please visit etcconnect.com/licenses.
-
Page 3: Table Of Contents
Install a Lens Tube Luminaire Wiring Install Canopy Luminaire Connect Portable Luminaire Power Up Procedure Identify Focus and Setup Adjust the Tilt Focus the Beam Shape the Beam Use the Color Frame Holder Source Four Mini LED (F-Drive) User Manual... - Page 4 Cleaning Specifications and Reference FCC Compliance Source Four Mini LED (F-Drive) User Manual...
-
Page 5: Overview
You must install a lens tube before you use the Source Four Mini LED. There are four lens tube sizes available: 19°, 26°, 36°, and 50°. There are also canopy, track, and portable versions of the luminaire that are not compatible with the F-Drive family of drivers and accessories. -
Page 6: Safety
• Ne pas installer le projecteur sur ou à côté d’une surface inflammable. • Vérifiez que le porte-accessoires est verrouillé avant de monter le projecteur. • N’utilisez pas le projecteur sans que la lentille soit installée. Source Four Mini LED (F-Drive) User Manual... -
Page 7: Canopy Luminaire
à la norme according to IEC 60536. IEC 60536. L’entrée et la sortie de ce produit The product input or output is convient uniquement au courant suitable for direct current only. continu. Source Four Mini LED (F-Drive) User Manual... -
Page 8: Installation
Installation Install a Lens Tube You must install a lens tube before you use the Source Four Mini LED. There are four lens tube sizes available: 19°, 26°, 36°, and 50°. Lens Tube Description 4M19LT (-1, -5) 19° Source Four Mini Lens Tube Only Black (White, Silver) 4M26LT (-1, -5) 26°... - Page 9 LEDs and may void the luminaire warranty. This release of the Source Four Mini LED luminaire is compatible with the R12 CC-150 output card or the W1 CC driver. Set the output channel for the luminaire to 350 mA.
-
Page 10: Install Canopy Luminaire
Use of Third-Party Drivers with Daisy-Chained Luminaires Source Four Mini LED luminaires can be controlled by third-party Class 2 or Low Voltage Limited Energy (LVLE) drivers that provide a maximum of 48 VDC. To daisy-chain luminaires and still have independent channel func- tionality, you must wire the first luminaire in the chain as described below. - Page 11 4. Connect a power and data in cable from the driver or ETC breakout box to the "IN" port on the luminaire. If you are daisy-chaining luminaires, be careful to connect the cables to the correct "IN"...
-
Page 12: Connect Portable Luminaire
For the portable luminaire, use an M10 bolt to secure a clamp (provided separately) to the luminaire. 1. Connect a power and data in cable from the driver or ETC breakout box to the "IN" port on the luminaire. If you are daisy-chaining luminaires, be careful to connect the cables to the correct "IN"... -
Page 13: Focus And Setup
You can shape the beam using the four shutters or with a pattern. Shape the Beam with Shutters The luminaire has four shutters: left, right, top, and bottom. Each shutter can be pulled out or pushed in to create the desired beam shape. Source Four Mini LED (F-Drive) User Manual... -
Page 14: Use The Color Frame Holder
5. Secure the slot cover by tightening the screw. Use the Color Frame Holder The Source Four Mini LED (F-Drive) comes equipped with a color frame (either 70 mm or 2 3/4 in), which is a metal frame used to hold color media (often referred to as gel) in front of the lens. - Page 15 3. Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth. 4. Slide the lens tube back into the shutter barrel with the color frame retainer clip on the top. 5. Reinstall the beam focus knob. Source Four Mini LED (F-Drive) User Manual...
- Page 16 Operation of this equipment in a residential area is likely to cause harmful inter- ference, in which case the user will be required to correct the inter- ference at their own expense. Source Four Mini LED (F-Drive) User Manual...
- Page 17 Source Four Mini LED (F-Drive) User Manual...
- Page 18 Source Four Mini LED (F-Drive) User Manual...
- Page 19 Source Four Mini LED (F-Drive) User Manual...
- Page 20 Global Offices n London | Rome | Holzkirchen | Paris | Hong Kong | Dubai | Singapore New York | Orlando | Los Angeles | Austin | © 2023 Electronic Theatre Controls, Inc. etcconnect.com | Support support.etcconnect.com Contact etcconnect.com/contactETC | Trademark and patent info: etcconnect.com/ip Third-party license agreement info: etcconnect.com/licenses | Product information and spe- cifications subject to change. ETC intends this document to be provided in its entirety. 7063M2130 Rev C Released 2023-12...