Control And Customize The Display; Lock The Display; Adjust The Display Settings - ETC Source Four LED 3 Series User Manual

Control and Customize the Display

Lock the Display

Set this switch to lock the UI and prevent any
changes to the fixture setup. The display
indicates when the UI is locked.

Adjust the Display Settings

1. Press the Menu button (
Intensity encoder to navigate to Local
Settings, and then press the Intensity
encoder to select it.
2. In the Local Settings screen, turn the
Intensity encoder to select the display
parameter that you want to modify,
and then press the Intensity encoder to
modify it.
3. Turn the Intensity encoder to modify the value of the parameter, and then press the
Intensity encoder to save the value.
4. Press the Menu button (
screen when you are done.
Parameter
Backlight
Encoders
Timeout
22
), turn the
) or press the red encoder until you return to the Main Menu
Description
Set the brightness of the display backlight from 10–100%.
Set the brightness of the four encoders from 10–100%.
Set the time that the display will remain illuminated after the last time you press an
encoder or button. Options are:
Never (display is always illuminated)
•
30 seconds
•
1 minute (default)
•
5 minutes
•
15 minutes
•
UI Lock
DMX
DMX
Address 001
Mode 3 Ch RGB
DMX Loss HLL 2 Min
UI Locked
1/3 Red
Source Four LED Series 3 User Manual