DOK-CONTRL-S67DIO4M12H-AP02-EN-P
Rexroth IndraControl S67 Digital Module High Speed 4 Inputs/Outputs – 0.2 A (84×M12)
7
Commissioning
7.1
General Information
NOTICE
If connections have not been closed with protective caps, liquid or dirt can
penetrate the S67-DIO4-HS-M12 and destroy the module. Protect all non-re‐
quired connection with protective caps to comply with protection class IP 67.
Before starting up the IndraControl 767 station, make sure that:
●
a field bus coupler of the IndraControl S67 series
HS-M12 module are correctly mounted
●
all required supply, sensor or actuator and S-BUS connections as well
as the S-BUS connection are screwed tightly at the provided connec‐
tions (see
chapter 6 "Connecting Data and Supply Cable" on page
●
an appropriate potential equalization is executed at the system
●
and the shielding is carried out correctly
1)
See field bus coupler application descriptions (IndraControl S67)
Bosch Rexroth AG
Exposed connections!
1)
41/79
Commissioning
and the S67-DIO4-
35)