Table of Contents
Advertisement
9
Commissioning
▶ Complete and sign commissioning report during commissioning and
conclusion of the commissioning ( chapter 17.2, page 18).
9.1
Notices on commissioning
Before commissioning, the control unit must be set at the system:
▶ Set parameter ( Chapter 10, page 12) according to the heat
source and system.
▶ Ensure that the heat is absorbed (e.g. by the DHW heating).
Otherwise the heat source will switch off.
9.2
Commissioning wizard
A Commissioning wizard is available for making the initial settings after
switching on the control unit for the first time.
The most important settings for operation of the control are made here.
1
Inbetriebnahme Assistent
10
Sprache
9
Zeitzone
8
Uhrzeit
7
Datumsformat
6
Datum
5
Speichern
Fig. 8
Commissioning wizard
[1]
Commissioning wizard
[2]
Deutsch
[3]
Europe/Berlin (Select time zone)
[4]
Cancel
[5]
Save
[6]
Date
[7]
Date format
[8]
Time
[9]
Time zone
[10] Language
After tapping a field, a selection for this menu item opens.
For every selection box:
▶ Perform setting.
▶ Tap on Save or Cancel.
Tap on Save to apply the settings and close the assistant.
If the Commissioning wizard is not run or is cancelled, the settings in
the corresponding menus may be changed.
Control 8310 – 6720856493 (2022/07)
2
Deutsch
3
Europa/Berlin
XX:XX
XX.XX.XXXX
XX.XX.XXXX
4
Abbrechen
0010025761-002
Commissioning
11
Advertisement
Table of Contents
Troubleshooting
