Bosch Rexroth IndraControl S67 Manual page 49

DOK-CONTRL-S67DIO4M12H-AP02-EN-P
Rexroth IndraControl S67 Digital Module High Speed 4 Inputs/Outputs – 0.2 A (84×M12)
Parameter Description
Substitute value re‐ The substitute value strategy can be specified. This strategy
sponse reports the substitute value or the last input value in case of a
field bus interruption.
One of the following substitute value strategies can be selec‐
ted:
- Apply substitute value
- Retain last value
Substitute value The substitute values strategy is applied to the module inputs.
The following options can be selected:
- 0
①
- 1
Filter time Set the input filter for the measured signals. The following op‐
tions are available:
- off
①
- 10 µs
- 25 µs
- 50 µs
- 100 µs
- 200 µs
- 1 ms
- 3 ms
Delivery state
①
The last value is a value reported at the contact before the in‐
②
terference. This value can be a "process value" for example
Tab. 8-6: Overview on the settable parameters for the "DI module" mode
Bosch Rexroth AG
Parameterization
①
②
47/79