30/79
Bosch Rexroth AG
Mounting the Module
5.6
Mounting on Profile Rail (only with Bosch Rexroth Accesso‐
ries)
5.6.1
Fastening Profile Adapter on the Module
Rexroth IndraControl S67 Digital Module High Speed 4 Inputs/Outputs – 0.2 A (84×M12)
Fig. 5-3:
Mounting the mounting rail adapter
In addition to the attachment using a mounting rail adapter, the S67-DIO4-
HS-M12 module can be fastened to a profile rail using a profile adapter and
nuts. It is required that the system supports this attachment type. The nuts
are not included in the scope of delivery.
Screw together the S67-DIO4-HS-M12 module and the profile adapter using
the M4 threaded screws provided, as shown in the figure below.
Fig. 5-4:
Attaching to a profile adapter
DOK-CONTRL-S67DIO4M12H-AP02-EN-P
50
51
52