Appendix; Diagnostic Information - Bosch Rexroth IndraControl S67 Manual

DOK-CONTRL-S67DIO4M12H-AP02-EN-P
Rexroth IndraControl S67 Digital Module High Speed 4 Inputs/Outputs – 0.2 A (84×M12)
14

Appendix

14.1

Diagnostic Information

Some field bus couplers display the error code in the form of an attribute path
(CIA), through which the diagnostics can be clearly assigned. Other field bus
couplers (e.g. Profinet I/O or Profibus DP) convert the attribute path into the
respecting field bus-specific message.
The following diagnostic codes can be generated by the S67-DIO4-HS-M12
module:
Diagnostic message
Short circuit/overload of field supply
This function is only active when the field sup‐
ply is switched on
Undervoltage U
LS
(Logic supply)
Undervoltage U
A
(Sensor/actuator supply)
Tab. 14-1: Diagnostics of the module
Diagnostic message
Overheating
(This function is only active when the actuator
output is switched on)
Tab. 14-2: Diagnostics of the channels of the module
Use the diagnostic overview (see
43) to deactivate specific diagnostics.
Bosch Rexroth AG
Attribute path
C I A
16 1 128 Diagnostic
50 1 128 Diagnostic
50 1 129 Diagnostic
Attribute path
C I A
9 Cha 130 Diagnostic
nnel
no.
chapter 8.2 "Diagnostic Overview" on page
73/79
Appendix
Classification
alarm
alarm
alarm
Classification
alarm