RE 24851-B/06.09 | W.H; WM.H
12
Disposal
12.1
Environmental protection
Careless disposal of the valve and the hydraulic fluid could lead to pollution of
the environment.
Thus, dispose of the valve and the hydraulic fluid in accordance with the cur-
rently applicable national regulations in your country.
Dispose of hydraulic fluid residues according to the respective safety data
sheets valid for these hydraulic fluids.
Please observe the following supplied notes for the environmentally-friendly
disposal of the valve.
12.2
Return to Bosch Rexroth AG
The products manufactured by us can be returned to us for disposal purposes at
no costs. However, the precondition is that there are no spurious adherences or
any other contamination. The hydraulic products have to be discharged before
they are returned. Furthermore, there must be no inappropriate foreign matter or
third party components when products are returned.
The products have to be sent free to the door to the following address:
Bosch Rexroth AG
Service Industriehydraulik [Industrial hydraulics]
Bürgermeister-Dr.-Nebel-Straße 8
97816 Lohr am Main
Germany
12.3
Packagings
Upon request, reusable systems can be used for regular deliveries.
The materials for one-way packagings are mostly cardboard, wood, and styro-
foam. They can be of without any problems. Due to ecological reasons, one-way
packagings should not be used for returning products to us.
12.4
Materials used
Our products do not contain any hazardous materials that could be released dur-
ing intended use. Normally, no adverse effects on human beings and on the envi-
ronment have to be expected.
The products essentially consist of:
•
Cast iron
•
Steel
•
Aluminum
•
Copper
•
Plastic materials
•
Elastomers
Bosch Rexroth AG
35/40
Disposal