Power-On Password Modify; Exit Settings - Key-Disp KD51C-U User Manual

otherwise exit the power-on password settings interface. The default value is N.
Y is power-on password enable. N is power-on password disable.
◆Power-on Password Change
When the display shows P3, 0000, to set new power-on password, press the "+" or the
"-" button to modify the value and then press the "i" button to confirm digit one by one until
the new 4-digit password is completed.
To store the new power-on password, hold the "i" button for 2s and then exit settings.
When switching the E-bike system on next time, the display will show P1, 0000, please
input the new password to power on.

◆Exit Settings

In the settings state, press the "i" button is to confirm the input. Hold the "i" button is to
store the settings, and then exit the current settings. Hold the "-" button is to cancel the
operating but not storing settings data, and then return to previous menu.
▉ If there is no operations in one minute, the display will exit the settings state.
Power-on Password Disable Interface
Power-on Password Change Interface
16