Power-On Password Enable/Disable; Power-On Password Modify; Exit Settings; Recover Default Settings - Key-Disp KD58C User Manual

Power-on Password Enable /Disable
Press the MODE button to enter power-on password modify interface. Press the UP
or DOWN button to select Disable or Enable and press the MODE button to confirm. The
default value is Enable. If you choose Enable, press the MODE button to enter Power-on
Password Modify interface, otherwise exit the power-on password settings interface.

Power-on Password Modify

When the display shows "Password Set, P3", press the UP or DOWN button to modify
the value and then press the MODE button to confirm digit one by one until the new 4-digit
password is completed.
To store the new po wer-on password, hold the MODE button for 2 s and then exit
settings.
When switching the eBike system on next time, the display will show P1,0000,
please input the new password to power on.
◆

Exit settings

In the settings state, press the MODE button to confirm the input. Hold the MODE
button for 2 s to save the settings and then exit the current settings. Hold the DOWN
button for 2 s to cancel the operating but not saving the settings data, and then return to
previous menu.
■
If there is not any operations in one minute, display will exit the settings state
automatically.

Recover default settings

dEF means recover default settings. Press both the UP and MODE button for 2 s to
enter recover default settings. Press the UP or DOWN button to choose Y or N. Y means
that recovers default settings. N means that do not recover default settings. When it is Y,
Power-on Password Entering Interface
Power-on Password Disable/Enable
Power-on Password Modify
Interface
Interface
8