Exit Settings - Key-Disp KD51C-D User Manual

◆Power-on Password Change
When the display shows Password Set，Enter Password 0000, to set new power-on
password, press the "+" or the "-" button to modify the value and then press the "i"
button to confirm digit one by one until the new 4-digit password is completed.
To store the new power-on password, hold the " i " button for 2s and then exit
settings.
When you switch on the E-bike system next time, the display will show P1, 0000 and
input the new password to power on.

◆Exit Settings

In the settings state, press the "i" button (short than 2s) is to confirm the input. Hold
the "i" button (for more than 2s) is to store the settings, and then exit the current settings.
Hold the "-" button is to cancel the operation but not storing settings data, and then return
to previous menu.
■If there is no operations in one minute, the display will exit the settings state.
Set Password Interface
Change Password Interface
15