Power-On Password Settings; Power-On Password Enable/Disable; Power-On Password Modify; Exit Settings - Key-Disp KD58C User Manual

◆Power-on Password Settings

P2:0000 represents power-on password settings. The default password is 1212.
After accessing the power-on password settings, press UP/DOWN to modify the
value and press ON/OFF to confirm digit one by one until the correct 4-digit password is
completed. Then press ON/OFF to access power-on password enable settings interface,
otherwise stay still in the password input state.

Power-on Password Enable/Disable

Press the UP or DOWN button to choose Disable or Enable and press the ON/OFF
button to confirm. The default value is Enable. If you choose Enable, press the ON/OFF
button to enter Power-on Password Modify interface, otherwise exit the power-on
password settings interface.
Power-on Password Change
When the display shows "Password Set, P3", press the UP or DOWN button to modify
the value and then press the ON/OFF button to confirm digit one by one until the new 4-
digit password is completed.
To store the new power-on password, hold the ON/OFF button for 2 seconds and
then exit settings.
When you switch on the E-bike system next time, the display will show P1,0000,
please input the new password to power on.

◆Exit settings

In the settings state, press the ON/OFF button to confirm the input. Hold the
ON/OFF button for 2 s to save the settings and then exit the current settings. Hold the
DOWN button for 2 s to cancel the operating but not saving the settings data, and then
return to previous menu.
Power-on Password Entry Interface
Power-on Password Disable/Enable Interface
Power-on Password Change Interface
10