Technical Data; Operating Device - Waters Andrew Alliance Magnet+ User Manual

Technical data

Labware Check the OneLab Domino Catalog
compatible at
domino-catalog
Relative humidity 80% at 37°C
Maximum 2000 m
operating altitude
Environment +4 to +37°C
temperature
operating range
User interface Through OneLab software
Ingress protection IP20*
Dimensions 170 x 162 x 115 mm
(W x L x H) (The specified dimensions are
subject to change according to the
labware)
Weight 1.65 kg
External power Input 100-240 VAC, 1.4 A
supply / output 24 VDC, 5 A, 120 W
Power or 5 A
current rating
Overvoltage Cat I
category DC port
Operating voltage 24 VDC
Network • Gigabit Ethernet
connectivity • Wi-Fi 2.4 GHz and 5 GHz
Pollution degree Pollution degree 2
of the intended
environment
Cleaning Only with a wet tissue or isopro-
panol
Warranty 1 year
Certification CE, FCC, RoHS, WEEE
*Avoid spilling liquid on the device.
andrewalliance.com/
Multiple connected devices
installation
1. Place your connected
devices as indicated by
OneLab.
2. Open the hatches.
3. Plug the power cables
into your devices power socket.
4. Pass the cables in front of devices and then
insert them into the dedicated path.
5. Close the hatches.

Operating device

Power on
When the device is in standby mode
(plugged to power source but turned
off), press the power button to turn
on the device.
Note: The device will automatically
start up when you plug it to a power
source.
Power off
When the device is in its idle state
(no experiment running), press the
5s
power button for 5 seconds to turn
off the device.