Updating The Software - Sony STR-DN1040 Operating Instructions Manual

When you use iTunes, set an iOS device to
accept control from this receiver and the
remote control when you want to use this
receiver and the remote control to operate
an iOS device.
Tips
• The most recent control command to the
receiver is given priority. The receiver starts
playing back audio content of another device
when it accepts control from that AirPlay-
equipped device, even if this receiver is being
used for AirPlay with the original device.
• The very loud sound may output from this
receiver when you set the volume too loud using
iOS devices or iTunes.
• For details on the use of iTunes, refer to the
Help of iTunes.
• The volume level of iOS devices or iTunes may
not be able to be linked with the volume level of
this receiver.

Updating the software

By downloading the latest version of the
software, you can take advantage of the
newest functions. The receiver accesses the
Sony server to update the software.
If a new update is available, follow the on-
screen instructions to update the software.
"UPDATE" appears on the display panel
when you are connected to the Internet and
using the Home Network or SEN function.
Make sure that other equipment connected
to the receiver is stopped before updating
the software.
For details on software update available,
refer to the customer support site
(page 127).
Notes
• Make sure not to turn off the receiver,
disconnect the network cable or perform any
operation on the receiver while the updating
operation is in progress.
• If you try to update the software when the Sleep
Timer is on, the Sleep Timer will turn off
automatically.
1
Select "Settings" from the home
menu, then press
The Settings menu list appears on the
TV screen.
2
Select "System", then press
3
Select "Network Update", then
press .
4
Select "Start", then press
The receiver starts checking the
available software update. Once you
start the update, you cannot restore the
previous software version.
The receiver completes the software
download when "Download 100%"
appears on the TV screen. Then, the
receiver starts to update the software.
The GUI and display panel are turned
off automatically and the ?/1 (on/
standby) indicator on the front panel
flashes slowly. It may take about
40 minutes to several hours at the
longest for the update to complete. The
time required for the update varies
depending on the update conditions,
such as the speed of the Internet
connection, etc.
When the update is completed,
"COMPLETE" appears on the display
panel and the receiver will restart
automatically.
Note
?
When the /1 (on/standby) indicator on the
front panel flashes slowly, do not disconnect
the AC power cord (mains lead).
To cancel the procedure
Select "Cancel" in step 4.
To go back to the previous
screen
Press RETURN O before the receiver
starts the software update.
You cannot go back to the previous screen
when the update starts.
.
.
.
75
US