Rf Receiving Sensitivity; Electrostatic Discharge - Quectel LTE-A Series Hardware Design

5.6. RF Receiving Sensitivity

The following tables show conducted RF receiving sensitivity of the module.
Table 35: Conducted RF Receiving Sensitivity
Frequency
WCDMA B1
WCDMA B5
WCDMA B8
LTE-FDD B1 (10 MHz)
LTE-FDD B3 (10 MHz)
LTE-FDD B5 (10 MHz)
LTE-FDD B7 (10 MHz)
LTE-FDD B8 (10 MHz)
LTE-FDD B20 (10 MHz)
LTE-FDD B28 (10 MHz)
LTE-TDD B38 (10 MHz)
LTE-TDD B40 (10 MHz)
LTE-TDD B41 (10 MHz)
NOTE
1)
SIMO is a smart antenna technology that uses a single antenna at the transmitter side and two
antennas at the receiver side to improve Rx performance.

5.7. Electrostatic Discharge

The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
EG060V-EA_Hardware_Design
Primary Diversity
-109.5 /
-109.5 /
-109.5 /
-97 -97
-97 -96.5
-97.5 -98
-95 -95.5
-97.5 -98
-97 -98
-97.5 -98
-97 -97
-97 -97
-96.5 -96.5
LTE-A Module Series
EG060V-EA Hardware Design
1)
SIMO 3GPP (SIMO)
/ -106.7
/ -104.7
/ -103.7
-100.5 -96.3
-100.5 -93.3
-101 -94.3
-97.5 -94.3
-101 -93.3
-101 -93.3
-101 -94.8
-100.5 -96.3
-100.5 -96.3
-100 -94.3
68 / 82