Ri Behaviors - Quectel LTE-A Series Hardware Design

The following table describes the pin definition of STATUS.
Table 19: Pin Definition of STATUS
Pin Name Pin No.
STATUS 171
Below is a reference design of the pin.

3.16. RI Behaviors

The AT+QCFG="risignaltype","physical" command can be used to configure RI behavior.
Regardless of from which port a URC is output, it triggers the behavior of the RI pin.
NOTE
The URC can be output from UART port, USB AT port or USB modem port depending on the parameters
of AT+QURCCFG command. The default port is USB AT port.
EG060V-EA_Hardware_Design
I/O Description
Indicate the module's operation status
DO
Module
STATUS
Figure 26: Reference Design of STATUS
EG060V-EA Hardware Design
Comment
1.8 V power domain
VBAT
2.2K
4.7K
47K
LTE-A Module Series
49 / 82