Operating Modes - Quectel LTE-A Series Hardware Design

W_DISABLE# 151
USB_BOOT 140
SLEEP_IND 144
RESERVED Pins
Pin Name Pin No.
3, 4, 6, 7, 8, 9, 11, 12, 14, 15, 18–23, 37, 38, 40, 41,71–74,
77–80, 91, 95, 101, 113, 115, 119, 134, 135, 152, 159, 161,
RESERVED
162,172, 176, 192–195, 197–201,209–213 18–23,
37,38,40,41, 71–74,77–80,192–195, 197–201, 209–213
NOTES
1)
1. The current consumption is tested in 3G/4G instead of 2G environment.
2)
2. The SPI interface only supports master mode.
"*" means under development.
3.

3.4. Operating Modes

The table below briefly summarizes the module's operating modes referred to in the following chapters.
Table 5: Overview of Operating Modes
Mode Details
Idle
Normal
Operation
Talk/Data
EG060V-EA_Hardware_Design
Airplane mode
DI
control
Force the module
DI into emergency
download mode.
Indicate the
DO module's sleep
mode
I/O Description
The module has registered on network and is ready to send and
receive data, its software being active.
The module is connected to network, its power consumption decided
by network setting and data transfer rate.
LTE-A Module Series
EG060V-EA Hardware Design
1.8 V power domain.
Pulled up by default.
V min = -0.3 V
IL
Bringing it LOW sets
V max = 0.6 V
IL
the module into
V min = 1.2 V
IH
airplane mode.
V max = 2.0 V
IH
If unused, keep it
open.
V min = -0.3 V
IL
1.8 V power domain.
V max = 0.6 V
IL
If unused, keep it
V min = 1.2 V
IH
open.
V max = 2.0 V
IH
1.8 V power domain.
V max = 0.45 V
OL
If unused, keep it
V min = 1.35 V
OH
open.
DC Characteristics Comment
Keep these pins
disconnected.
26 / 82