Table of Contents
Advertisement
Page 52
Section 13. Sprinkler System Setup
This equipment may not be part of your system.
NOTE
Please check with your installer.
In addition to the individual sprinkler programming,
the user may enable or disable all sprinkler programs,
cancel sprinkler programs for 24 hours, or manually
start one or more sprinkler programs.
13.1
Running the Sprinkler System
If there are no sprinkler programs set to ON,
NOTE
then SPRINKLERS does not appear in the
DEVICES list.
HOME > OTHER DEVICES ON / OFF > SPRINKLERS
From the HOME screen, touch the OTHER DEVICES
ON/OFF button to display the DEVICES screen shown
below.
Devices
Filter Pump
On
Sprinklers
Adj
Variable Speed
Aux 1
Spa
Off
Aux 2
Pool Heat
Off
Dimmer Adjust
Spa Heat
Pool Light
Off
Home
Menu OneTouch
Help
13.1.1
Cancel Today - 24 Hour Sprinkler
Delay
This feature is used to disable the sprinklers for a period
of 24 hours. All pending programs are canceled and the
system enters the delay state. After 24 hours the system
returns to the ENA state.
The 24-hour time delay is reset each time CANCEL
TODAY is selected.
AquaLink
®
Touch™ Owner's Manual
Thu January 1, 2009 3:03 PM
Off
Off
Aux 5
On
Off
Aux 6
On
Off
Aux 7
Page
Off
Off
Extra Aux
Off
All Off
Back
Status
Photos
Power
This feature may also be used to quickly turn off
NOTE
all sprinkler valves.
OTHER DEVICES ON / OFF > SPRINKLERS > CANCEL TODAY
From the DEVICES screen, touch the SPRINKLERS
button to display SPRINKLER OPERATION screen.
Touch the CANCEL TODAY button to set a 24 - hour
sprinkler delay.
Sprinkler Operation
Cancel
Programs
Today
Home
Menu OneTouch
Help
13.1.2
Enabling the Sprinkler System
To automatically run programs at their start times, the
sprinkler control system must be in the enabled state.
OTHER DEVICES ON/OFF > SPRINKLERS > PROGRAMS
To enable the sprinkler system, touch the PROGRAMS
button, on the SPRINKLER OPERATION screen.
Sprinkler Operation
Cancel
Today
Home
Menu OneTouch
Help
Thu January 1, 2009 3:03 PM
Manual
Enable
Start
Power
Back
Status
Photos
Thu January 1, 2009 3:03 PM
Programs
Manual
Enable
Start
Back
Status
Power
Photos
Advertisement
Table of Contents
