To Set Up The Water Days; To Set Up The Sprinklers Program Start Time Menu; To Set Up The Sprinkler Valve Duration Time - Jandy AquaLink Touch Owner's Manual

Page 54
13.2.1

To Set Up the Water Days

You can choose All to run the program all week long,
Even Days, Odd Days or select the desired day(s) to run
the enable programs.
From the SPRINKLER SETUP screen, enable the
program # by touching the ON button.
Sprinkler Setup
Pgm Start Time Days
1 7:00 AM M, F
2 8:00 AM Tu, Th, Sa
3 6:00 AM M,Tu,W,Th,F,Sa,Su
Start Time Set Duration
Home Menu OneTouch Help
13.2.2 To Set Up the Sprinklers Program
Start Time menu
From the SPRINKLER SETUP screen, touch the
START TIME button to display the numeric keyboard.
Enter the start time and touch the ENTER button to save
it.
Sprinkler Setup
Home Menu OneTouch Help
AquaLink ® Touch™ Owner's Manual
Thu January 1, 2009 3:03 PM
Enable
Days of the Week
Off
All M Tu W
On
Off Th F Sa Su
Save Even Days Odd Days
Back Status Photos Power
Thu January 1, 2009 3:03 PM
Start: 600 AM
7 8 9
4 5 6
1 2 3
0
Clear Enter
Back Status Photos Power
13.2.3 To Set Up the Sprinkler Valve
Duration Time
The Sprinkler Control module will control up to eight
(8) valves, plus one (1) master valve. When a program
is run, the master valve always activates 1-2 seconds
before the first programmed valve in the program.
Valves are then activated in numerical order for a time
equal to their duration setting. There is a 1-2 second
delay between valve activations.
Valve durations are adjustable from OFF to 240
minutes, in increments of one (1) minute from OFF to
10 minutes, increments of 10 minutes from 10 to 60
minutes, and increments of 30 minutes from 60 to 240
minutes (4 hours).
After setting the water DAYS, touch the DURATION
button to display the SPRINKLER SET DURATION
screen. Touch the PROGRAM button to be set up.
Touch the PAGE UP/DOWN button to select the desired
VALVE. Touch the DURATION time and using the
numeric keyboard enter the new duration time. Touch
the ENTER button when finished.
Sprinkler Set Duration
Valve Duration (mins)
Program
1
1 10
2 30
3 Off
Program
4 Off
2
5 Off
6 Off
7 Off
Program
Page
3
Up
Home Menu OneTouch Help
If you enter a a value greater than 240 minutes, the
following error screen will be displayed.
Error
X
Valve duration must be
0 - 240 Minutes (0 - 4 hours)
Thu January 1, 2009 3:03 PM
Set Minutes: 30
7 8 9
4 5 6
1 2 3
0
Page Clear Enter
Down
Back Status Photos Power
Close