Manual Feed Activation; To Perform An Orp Manual Feed; To Perform A Ph Manual Feed; To Enable The Chemlink™ Feeder Tank Level Switch - Jandy AquaLink Touch Owner's Manual

14.4

Manual Feed Activation

14.4.1

To Perform an ORP Manual Feed

From the CHEMLINK setup screen, highlight the
ORP MANUAL FEED entry. A CONFIRM dialog box
will appear, touch the YES button to proceed with the
manual ORP feed.
ChemLink
ChemLink 1
ORP/pH Setup
ORP Manual Feed
pH Manual Feed
Level Switch
Home Menu OneTouch Help
14.4.2

To Perform a pH Manual Feed

From the CHEMLINK setup screen, highlight the pH
MANUAL FEED entry. A CONFIRM dialog box will
appear. Touch the YES button to proceed with the
manual pH feed.
ChemLink
ChemLink 1
ORP/pH Setup
ORP Manual Feed
pH Manual Feed
Level Switch
Home Menu OneTouch Help
14.4.3 To Enable the ChemLink™ Feeder
Tank Level Switch
This feature allows the use of an external, tank-mounted
level switch to indicate when a liquid tank is empty to
prevent the dry feeding of a peristaltic pump. These
switches are an after-market product and not available
through Jandy. There are only provisions for one (1)
switch. The switch must be normally closed (NC).
AquaLink
Thu January 1, 2009 3:03 PM
ORP 650
pH 7.5
Select
Power
Back Status Photos
Thu January 1, 2009 3:03 PM
ORP 650
pH 7.5
Select
Back Status Power
Photos
® Touch™ Owner's Manual
From the CHEMLINK setup screen, highlight the
LEVEL SWITCH entry. An 'X' on the display indicates
the Level Switch is enabled. Touch the LEVEL
SWITCH again to disable it.
ChemLink
Home Menu OneTouch
Thu January 1, 2009 3:03 PM
ChemLink 1
ORP/pH Setup
ORP 650
ORP Manual Feed pH 7.5
pH Manual Feed
Level Switch X
Select
Help Back Status Photos
Page 61
Power