Table of Contents
Advertisement
4.6
Lockouts Password
The LOCKOUTS PASSWORD menu prevents changes
to specific AquaLink RS operations.
When SYSTEM feature is on "LOCK", changes to
program and system setup items are prevented. When
SPALINK
RS and SPA SWITCH features are on
®
"LOCK", all control from the SpaLink RS and Spa Side
Switch are prevented.
When DEVICE feature is on "LOCK", the selected
device cannot be controlled manually. However,
the device can be controlled by a program. With
LOCKOUT PASSWORD, the user may restrict access
to programs, temp settings, group settings, and system
setup. One practical use of this feature might be to allow
an owner to restrict the control of equipment located at
a rental property.
Password must be four (4) numbers and the
NOTE
same password is used for System, Programs,
Spa Side Switch, SpaLink and Devices.
4.6.1
To Lock Out Devices
MENU > LOCKOUTS PASSWORD
From the MENU screen, touch the LOCKOUT button
to display the LOCKOUT/PASSWORD screen.
Touch the LOCKOUT or PASSWORD button
and choose one of the following options: System,
SpaSwitch, SpaLink and Devices.
Toggle the LOCKOUT button on the desired item to
turn it ON or OFF.
Toggle the PASSWORD button on the desired item to
turn it ON or OFF.
Lockout/Pswd Status
Lockout/Pswd Status
Lockout
Password
System
OFF
Spa Switch
OFF
SpaLink
OFF
Devices
OFF
Home
Menu OneTouch
Help
AquaLink
Thu January 1, 2009 3:03 PM
ENABLED
OFF
OFF
Change
OFF
Password
Back
Status
Photos
Power
®
Touch™ Owner's Manual
4.6.2
To Set Lockout Password
MENU > LOCKOUTS PASSWORD
From the MENU screen, touch the LOCKOUTS button
to display the LOCKOUTS PASSWORD screen.
Touch the CHANGE PASSWORD button to display
the PASSWORD screen. Enter a new password in the
numeric keypad. If you make any mistake with your
entry, touch the CLEAR button to reset and enter your
new password again. Touch ENTER to save your new
password.
Password
Password
Home
Menu OneTouch
4.6.3
How to Use the System when a
Password is Enabled
If a password is enabled for the system and a user tries
to access: Set Temp, Set Time, Programs, Program
Groups, or System Setup, a Password Entry Screen will
appear to allow the user to continue with their selection.
If a password is enabled for a device, and a user tries
to access that device from a OneTouch control panel, a
password entry screen will appear to allow the user to
continue with their selection.
If a password is enabled and entered for a SpaLink or a
Spa Side Remote and a user tries to use either of those
devices, the units will not respond.
To enable any of these devices, touch the LOCKOUT
PASSWORD button in the MENU screen. Choose
the equipment and touch the PASSWORD button in
the LOCKOUT/PSWD STATUS screen and enter the
current password. The system will accept a default
password of 1234. The password can be changed.
Page 15
Thu January 1, 2009 3:03 PM
4321
7
8
9
4
5
6
1
2
3
0
Clear
Enter
Power
Help
Back
Status
Photos
Advertisement
Table of Contents
