Table of Contents
Advertisement
Page 42
10.17.2 Customize Service Phone
SYSTEM SETUP > PRODUCT INFO
From the PRODUCT INFO screen, touch the
CUSTOMIZED SERVICE PHONE to view the screen
below. On this screen touch the CLEAR button to
remove existing phone number. Use the numeric
keyboard to enter new phone number. Touch the
ENTER button to save new phone number.
Product Info
Home
Menu OneTouch
Help
10.18 Air Temperature
Use the Air Temperature menu to turn the air
temperature display on or off.
10.18.1 To Set Up Air Temperature
MENU > SYSTEM SETUP > AIR TEMP
From the SYSTEM SETUP screen, touch the AIR TEMP to
enable the air temperature.
System Setup
Heat
Assign
Pump
JVAs
HP Priority
Dusk
N/A
Setup
All Off
Slr Priority
Time
Disabled
Home
Menu OneTouch
Help
AquaLink
®
Touch™ Owner's Manual
Thu January 1, 2009 3:03 PM
000-000-0000
7
8
9
4
5
6
1
2
3
0
Clear
Enter
Back
Status
Power
Photos
Thu January 1, 2009 3:03 PM
PLockOut
Air Temp
Enabled
Enabled
DST
Temp
Enabled
Calibrate
Product
Degrees
Info
Fº
Back
Status
Photos
Power
10.19 Temp Calibration
This menu allows adjustment of the temperature that
is displayed on the AquaLink RS. The temperature can
only be adjusted up four (4) degrees Fahrenheit or down
four (4) degrees Fahrenheit.
10.19.1 To Set Up Calibration
MENU > SYSTEM SETUP > TEMP CALIBRATE
From the SYSTEM SETUP screen, touch the TEMP
CALIBRATE button to display the WATER TEMP
CALIBRATE screen. Touch the POOL or SPA button
and use the arrow keys to set values.
If the temperature is off by more than four
NOTE
(4) degrees, contact your local service
representative.
Water Temp Calibrate
Pool
80º
Spa
100º
Home
Menu OneTouch
Help
10.20 Degrees C/F
The Degrees C/F menu allows you to change the
AquaLink RS temperature display from Fahr en heit to
Celsius or vice versa. When changing from Fahrenheit
to Celsius, you will have to re-enter the temperature
settings.
Thu January 1, 2009 3:03 PM
Adjust Temp +/- 4º
+2
Back
Status
Photos
Power
Advertisement
Table of Contents
