To Set Up Degrees; In-Floor Cleaning; To Set Up In Floor Cleaning; Clear Memory - Jandy AquaLink Touch Owner's Manual

Wired/wireless controller
Hide thumbs Also See for AquaLink Touch:
Table of Contents

Advertisement

10.20.1 To Set Up Degrees

MENU > SYSTEM SETUP > DEGREES
From the SYSTEM SETUP screen, toggle the
DEGREES button to set the desired temperature setting.
System Setup
Heat
Assign
Pump
JVAs
HP Priority
Dusk
N/A
Setup
All Off
Slr Priority
Time
Disabled
Home
Menu OneTouch
Help

10.21 In-Floor Cleaning

This menu is used to enable or disable the automatic in
floor cleaning feature. When enabled, the AquaLink RS
rotates the in-floor Jandy valve actuators (JVAs) every
20 minutes. In-floor cleaning only works when the filter
pump is on.
If activated this circuit will utilize the solar JVA
NOTE
relay socket and circuit to control the in-floor
valve unless a solar sensor is installed, then the
cicuit reverts to AUX 3.

10.21.1 To Set Up In Floor Cleaning

MENU > SYSTEM SETUP > IN-FLOOR
From the SYSTEM SETUP screen, touch the IN-
FLOOR button to enable the in-floor cleaning feature.
System Setup
In-Floor
Chemlink
Disable
Clear
Memory
Cancel
Delay
Home
Menu OneTouch
Help
AquaLink
®
Touch™ Owner's Manual
Thu January 1, 2009 3:03 PM
PLockOut
Air Temp
Enabled
Enabled
DST
Temp
Enabled
Calibrate
Product
Degrees
Info
Back
Status
Photos
Power
Thu January 1, 2009 3:03 PM
Back
Status
Photos
Power

10.22 Clear Memory

The CLEAR MEMORY menu will clear all stored
values from the AquaLink RS memory. All settings will
be reset to their default settings. Stored values include
auxiliary labels, all programs, freeze protection settings,
remote settings, and thermostat settings. The time and
date will not be cleared.

10.22.1 To Set Up Clear Memory

MENU > SYSTEM SETUP > CLEAR MEMORY
From the SYSTEM SETUP screen, touch the CLEAR
MEMORY button and a dialog box will appear. Touch
the YES button to clear memory. Touch the NO button
to keep all stored settings unchanged. Clearing memory
will erase all schedules, auxiliary labels, and system
settings. The date and time will remain.
System Setup
In-Floor
Chemlink
Disable
Clear
Memory
Cancel
Delay
Confirm
Confirm
?
Home
Menu OneTouch
Help
Page 43
Thu January 1, 2009 3:03 PM
Are you sure you want
to erase all settings?
Back
Status
Photos
Power
Yes
No

Advertisement

Table of Contents
loading

Table of Contents