Assign Jvas; To Set Up Assign Jvas; Dusk Setup - Jandy AquaLink Touch Owner's Manual

The filter pump is always assigned to freeze
NOTE
protection.
Important
Information on Freeze Protection
Freeze protection is intended to protect equipment
and plumbing for short periods of freezing only.
It does this by activating the filtration pump and
circulating the water to prevent freeze inside
equipment or plumbing. Freeze protection does
not guarantee that equipment will not be damaged
by extended periods of freezing temperatures or
power outages. In these conditions, the pool and
spa should be shut down completely (e.g. drained of
water and closed for the winter) until warmer weather
exists.

10.12 Assign JVAs

The ASSIGN JVAs menu allows Jandy Valve Actuators
(JVAs) to be assigned to any auxiliary button. This
means that whenever you press that auxiliary button,
a valve turns. On pool/spa combination models, there
are commonly two extra JVAs that can be assigned to
auxiliary buttons: the Cleaner JVA and the Solar JVA.
On pool/spa only models, there are four JVAs that can
be assigned to auxiliary buttons. The installer must
set these JVAs for this feature to operate correctly.
Assigning JVAs lets the owner control certain features
like diverting water to a waterfall or bank of spa jets.
Multiple JVAs can be assigned to one auxiliary button
without extra hardware.

10.12.1 To Set Up Assign JVAs

MENU/HELP > SYSTEM SETUP > ASSIGN JVAs
Touch the ASSIGN JVAs button on the SYSTEM
SETUP screen to display the ASSIGN JVAs menu.
Assign JVAs
Intake Solar
Free Free
Return Cleaner
Free Free
Home Menu OneTouch Help
AquaLink ® Touch™ Owner's Manual
Thu January 1, 2009 3:03 PM
Assign JVA
No Assignment
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Page
Page
Select
Down
Up
Back Status Photos Power
Touch the JVA button you wish to assign. Touch SAVE
when finished.
If a solar sensor is installed, the solar JVA will
NOTE
automatically be assigned and will be marked
as USED.

10.13 Dusk Setup

The DUSK SETUP screen is used to set a device to
automatically turn on after sunset.
On the DUSK SETUP screen, you can set the duration,
a time adjust value if you live between major city
selections or in a heavily shaded area, and set specific
devices.
Time and Date must be correct. See Section
NOTE
"To Set Up Date/Time"
4.4,
MENU > SYSTEM SETUP > DUSK SETUP
From the SYSTEM SETUP screen, touch the DUSK
SETUP button to display the DUSK SETUP screen.
Toggle the ENABLED/DISABLED button and select
your choice.
Dusk Setup
Disabled
City/
Time Zone
Home Menu OneTouch Help
Page 39
.
Thu January 1, 2009 3:03 PM
Time Adjust
Off Time
10:00 PM 5 Minutes
Set Sunset at:
Devices 5:54PM
Back Status Photos Power