Customize Home; Customize General, Aux And Onetouch™ Items; Touch Setup; Brightness - Jandy AquaLink Touch Installation And Operation Manual

Page 16
6.4

Customize Home

The CUSTOMIZE HOME screen is used to link the
icons of the HOME screen to general items, auxiliaries,
and OneTouch™ settings.
MENU > CUSTOMIZE HOME
From the MENU screen, touch the CUSTOMIZE
HOME button to display the CUSTOMIZE HOME
screen.
Customize Home
General Items
General
Filter Pump
VSP Pump
Spa
Aux
Pool Heat
Spa Heat
OneTouch
Label Label Label
One Two Three
Home Menu OneTouch Help
6.4.1 Customize General, Aux and
OneTouch™ Items
Highlight the GENERAL, AUX or ONETOUCH
button. Select the desired item from the item list. Touch
an icon from the bottom list. The label of the icon
should reflect the assigned item.
Use the UP/DOWN arrows to scroll the list.
Customize Home
General Items
General
Filter Pump
VSP Pump
Spa
Aux
Pool Heat
Spa Heat
OneTouch
Label Label Label
One Two Three
Home Menu OneTouch Help
AquaLink Touch™ and Operation Installation Manual
®
Thu January 1, 2009 3:03 PM
1) Select label group
Page
2) Select label name
from list
3) Touch icon to assign
Page
Label Label Label Label
Four Five Six Seven
Photos Power
Back Status
Thu January 1, 2009 3:03 PM
1) Select label group
Page
2) Select label name
from list
3) Touch icon to assign
Page
Label VSP Label Label
Four Pump Six Seven
Power
Back Status Photos
6.5

Touch Setup

The TOUCH SETUP screen allows to display features
of the Touch controller screen to be set up.
MENU > TOUCH SETUP
From the MENU screen, touch the TOUCH SETUP
button to display the TOUCH SETUP screen.
Touch Setup
Slideshow Image Time
Enabled 1 Min
No Activity

Brightness

30 Sec
80%
Home Menu OneTouch Help
Note that the wireless AquaLink Touch controller
displays an additional RF CHANNEL button.
6.5.1 Brightness
The AquaLink Touch screen is designed to be lit so
that you can use this controller in various lighting
conditions. The brightness of the screen can be easily
adjusted.
From the TOUCH SETUP screen, touch the
BRIGHTNESS button, and the screen will brighten by
increments of 10%. The default setting for this feature
is 80%.
After reaching 100% brightness, the screen will
NOTE
darken back to 10% if the BRIGHTNESS button
is touched again.
6.5.2

Sound

The sound is a single tone, generally made when
touching the buttons on the AquaLink Touch screen.
▪ DEFAULT - Enabled.
If you want to disable the sound, touch the SOUND
button on the TOUCH SETUP screen.
Thu January 1, 2009 3:03 PM
Sleep Mode Sleep Time
Enabled 10:00 P.M.
Sound Calibrate
Enabled
Touch Screen
Address
RF Channel
1 1
Back Status Photos Power