Spa; Pool Heat; Spa Heat (Dual Equipment); Solar Heat - Jandy AquaLink Touch Owner's Manual

Wired/wireless controller
Hide thumbs Also See for AquaLink Touch:
Table of Contents

Advertisement

Page 28
9.3

Spa

The SPA mode switches water circulation from the pool
to spa (pool/spa combination models only). Turning on
the spa also activates the filter pump (after a delay for
valve rotation) and deactivates the pool cleaner if it is
on.
The SPA mode must be on to display the spa
temperature and/or to heat the spa. Activation takes
place after a 30 seconds delay (while valves are
turning).
HOME > OTHER DEVICES ON / OFF > SPA
In HOME menu, touch the OTHER DEVICES ON/OFF
button to display the DEVICES screen. Touch the SPA
button to turn the spa ON or OFF.
Devices
Filter
On
Sprinklers
Pump
Variable
Adj
Aux 1
Speed
Spa
Off
Aux 2

Pool Heat

Off
Aux 3

Solar Heat

Pool Light
Off
Home
Menu OneTouch
Help
Touch the BACK button in the navigation bar to return
to the HOME screen.
9.4
Pool Heat
The POOL HEAT selection enables the heater for the
pool. It uses the setting from SET TEMP menu, or you
can increase/decrease when enabling.
See Section 4.3.1, "Pool Heat".
HOME > OTHER DEVICES ON / OFF > POOL HEAT
From the HOME menu screen, touch the OTHER
DEVICES ON/OFF button to display the DEVICES
screen. Touch the POOL HEAT button to ENABLE the
pool heat.
Touch the BACK button in the navigation bar to return
to the HOME screen.
AquaLink
®
Touch™ Owner's Manual
Thu January 1, 2009 3:03 PM
Off
Off
Aux 5
On
Off
Aux 6
On
Aux 7
Off
Page
Off
Extra Aux
Off
Off
All Off
Power
Back
Status
Photos
9.5

Spa Heat (Dual Equipment)

The SPA HEAT enables the heater for the spa. It uses
the settings from SET TEMP menu, or you can increase/
decrease when enabling.
See Section 4.3.2, "Spa Heat".
HOME > OTHER DEVICES ON / OFF > SPA HEAT
From the HOME menu screen, touch the OTHER
DEVICES ON/OFF button to display the DEVICES
screen. Touch the SPA HEAT button to ENABLE the
spa heat.
Touch the BACK button in the navigation bar to return
to the HOME screen.
9.6
Solar Heat
The SOLAR HEAT selection controls solar heating.
A solar heating system and optional solar sensor are
required for SOLAR HEAT selection to operate.
HOME > OTHER DEVICES ON / OFF > SOLAR HEAT
From the HOME menu screen, touch the OTHER
DEVICES ON/OFF button to display the DEVICES
screen. Touch the SOLAR HEAT button to turn solar
heat ENA or OFF.
Devices
Filter
On
Sprinklers
Pump
Variable
Adj
Aux 1
Speed
Spa
Off
Aux 2
Off
Pool Heat
Aux 3
Solar Heat
Pool Light
Off
Home
Menu OneTouch
Help
Touch the BACK button in the navigation bar to return
to the HOME screen.
If a Heat Pump is properly connected to this
NOTE
system, HEAT PUMP will appear on the screen
in place of SOLAR HEAT.
If a solar sensor is not installed, EXTRA AUX
NOTE
replaces SOLAR HEAT and may be used to
control an auxiliary piece of equipment (see the
following Section 9.7, "Auxiliary Equipment" to
turn on or off EXTRA AUX).
Thu January 1, 2009 3:03 PM
Off
Aux 5
Off
On
Off
Aux 6
On
Off
Aux 7
Page
Off
Off
Extra Aux
Off
All Off
Back
Status
Power
Photos

Advertisement

Table of Contents
loading

Table of Contents