Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Static and dynamic tests
Before commissioning, the static and dynamic tests have been performed in full compliance with the
harmonised industrial standard EN 280 Art. 6.3.
After-sale service
For any mechanical interventions, repairs and alterations/modifications, please refer to the authorised
workshops only. For any specific information please contact our Technical After-Sale Assistance.
Spare-parts service
Good working performance of the unit, as well as its long life may be ensured by using the original spare
parts only. Please make use of the "SPARE PARTS CATALOGUE" for this purpose.
Please always quote the information/data provided on the identification plates placed on the chassis
and the cage, should you require any spare parts or technical assistance.
Liability
La IMER International S.p.A. shall be released from any liability or any obligations for any damage to
persons or objects caused by any of the reasons listed further below:
•
Non-observance of the instructions comprised in this MANUAL referring to driving, use and
maintenance of the machine.
•
Erroneous actions in regarding the use and maintenance of the machine.
•
Modifications introduced either to the structure, and/or parts of the machine without prior authorisation
of IMER International S.p.A., and/or making use of any inappropriate equipment for the task.
•
Non-standard and/or incorrect use of the machine, in contravention of the specific instructions
comprised in the present MANUAL.
•
Use of any non-original spare parts not specifically authorised by the Manufacturer.
9
IM R13 T
Advertisement
Table of Contents
