Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Machine stabilisation
2
Once the machine is properly positioned, the procedures of
stabilisation and levelling out may be commenced.
Stabilisers may be repositioned only when the machine is stowed away
Before commencing any machine stabilisation operations, make sure there are no persons
Before commencing any machine stabilisation operations, make sure the terrain is flat
(without any potholes or depressions), with a good adhesion and able to support the
maximum load transferred onto the ground by the stabilisers, that is described on the
If necessary place some strong weight distribution plates under the stabiliser small plates
Make sure the stabilisers do not rest on any underground pipes or road drainage wells
Machine stabilisation is achieved when the machine is in a horizontal position with
Attempting to have the machine stabilised on a terrain of a higher inclination than the
permitted one may result in compromising its overall stability and consequently cause
It is absolutely mandatory to work with the machine stabilised well within
in the proximity of the plates and stabiliser cylinders
rating plate placed on the machine
tolerance below 1°
serious damage to people and property.
the limit actually allowed by the manufacturer
78
IM R13 T
2
Advertisement
Table of Contents
