Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Receiver
The electronic control unit is contained in a sturdy plastic box and is provided with
connectors that connect the platform panel.
The electronic control unit of the radio control mount the antenna and the radio receiver,
the remote control no.
Status and alarm indications are reported by the central unit through a 7-segment
display placed on the receiver.
In the event of a malfunction the display unit will show "Er" followed by four characters divided into two
blocks corresponding to the allocated error code.
If the problem is regarded as "temporary" only, the error code will be repeated 3 times and then the radio
control will return to stand-by, just as in the switched-on mode.
If the malfunction is regarded as "blocking", the display will show the error code continuously until the
radio control is turned off.
The error code may be displayed upon the activation of the receiver, or upon the activation of the platform
control panel (thus enabling the operating mode).
Dead Man Button
Dead Man Button is located on the right side of the platform
panel,on the basket
It is an additionaly securety for operator,
because it allows movements only if it is pressed
27
IM R13 T
Advertisement
Table of Contents
