Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Maintenance of rubber crawling tracks
Checking the tension of the crawling tracks
•
Position the machine on a compact and flat surface
•
Have the machine stabilised
•
Measure the distance A between the outer and inner part of the rubber track in relation to 2 central
rolls
The tension is normal if the distance is between 10 and 15 mm.
If the value A does not correspond to the indicated values, the crawling track is loosened up or
overstretched; see the following paragraph: "How to loosen up - stretch the crawling track".
121
IM R13 T
Advertisement
Table of Contents
