Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Long life and maximum safety during machine operation can only be assured by careful and regular
maintenance.
The schedule indicated in the maintenance summary table refers to normal use conditions, whereas in
the case of any heavy duty working conditions (extreme temperature, polluted atmosphere, high humidity,
high elevation, etc.) those intervals must be shorter.
The frequency and scope of periodical maintenance and inspections may depend on applicable national
regulations.
It is recommended to have at least an annual inspection carried out by an authorised service centre.
Machine cleaning
Once each working-shift has been finished, or when you feel it is necessary, have the machine cleaned:
•
Clean all the surfaces by means of a compressed air blow, preventing undue accumulation of grime
and dirt.
•
Spray a normal degreasing product and eliminate the residual dirt using of cotton clothes.
Never use diluents, scrapers or steel brushes to prevent damaging
Do not clean the machine using pressurised jets of water; the penetration
of water or moisture inside the electric components could cause malfunctions and /or
Maintenance
the painted surface
damage to the electric/electronic control components
106
IM R13 T
Advertisement
Table of Contents
