Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Checking the hydraulic tubes
Avoid spilling the hydraulic fluid by using collection tanks,
and take precautions against the accidental loss and escape of
•
Control visually all hydraulic joints and tighten the junctions, if necessary.
•
Check all flexible hydraulic tubes; replace them, if necessary.
Check the performance
Use a chronometer for performing the following checks:
Perform the tests with the machine on a level surface, with the diesel/petrol engine on and
Safety speed
•
Select safety speed on the platform control panel.
•
Set the crawling tracks joysticks to maximum forward position.
•
Check that the machine covers a 10 m distance in more than 75 sec.
Lifting/lowering of the boom
•
Select the boom lifting function from the ground control panel and check that it takes about 36 sec.
to complete the lift.
•
Lower the boom and check that it takes about 36 sec.
Hydraulic oil is a pollutant
hydraulic fluid by using oil-absorbent products
the engine switched to "hare"
119
IM R13 T
Advertisement
Table of Contents
