Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Switch the platform control panel on with the switch
Joystick controls
Switch
selectors
The LED ON and LED MICRO indicate the functioning status and any potential alerts.
RED LED ON lit up: platform control panel is active and transmitting via cable or via
radio.
RED LED ON flashing once every second, (for radio versions): the battery is running
low. This indication is preceded by three beeps from the internal buzzer.
RED LED MICRO lit up: radio communication signal is lost (for radio versions).
Green LED MICRO off indicates that the HARE speed is active for the diesel/petrol engine.
Green LED MICRO flashing indicates that the TURTLE speed is active for the diesel/petrol
engine.
Error code
The platform control panel performs a check on its own parts at each start-up and in the event of any
faults it shows an error code by causing the LED ON to flash and the internal buzzer to beep a number
of times, depending on the actual type of error found. Refer to the platform control panel manual attached
to the machine.
Platform control panel
15 S
OPTION
Led MICRO
and wait until red LED ON is on .
Display unit
STOP
OPTION
58
Led
OPTION
!
Led ON
IM R13 T
Advertisement
Table of Contents
