Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
In the event of long storage periods, shelter the machine in a dry and ventilated place, with the battery
fully charged. If possible, keep the battery charger connected and powered to keep the battery charged,
otherwise recharge the battery on regular basis, every 2 months.
Storage temperature: -20/+50°C
Before using the machine after a storage period exceeding 30 days,
perform the checks indicated in the maintenance summary table,
Disposal and scrapping
The machine consists mainly of steel, aluminium, plastic, synthetic rubber and copper.
Special attention must be paid to disposal of electric batteries (Italian legislation D.Lgs. 188/08) and of
the hydraulic oil contained in the tank of the hydraulic circuit (Italian legislation: DPR 691/82).
The main components of the machine are listed below:
•
Cast iron
•
Nylon
•
Steel
•
Teflon
•
Copper
•
Polycarbonate
•
PVC
•
Ertalyte
Storage
in the section "after long periods of inactivity"
105
IM R13 T
Advertisement
Table of Contents
