USE AND MAINTENANCE MANUAL
Battery
The AGM battery does not require the electrolyte level to be checked.
Clean the terminal contact surfaces and then lubricate with antiacid grease or Vaseline.
Charge the battery
The battery charge level can be read out on the pushbutton panel.
For the battery recharge, please see section on "Battery recharge".
Battery replacement
•
The battery is housed in the front part of the chassis.
•
Set the battery switch in the OFF position.
•
Open the cover protecting the battery compartment.
•
Disconnect the battery terminals, always starting off with the negative (-) pole.
•
Reconnect the electric cables always starting off with the positive (+) pole.
Replace the battery with an equivalent one
112
IM R13 T