Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
The following pictogram on the display unit on the platform control panel will appear, in
+ _
addition to indicating the fault of the alternator (lit up steadily); it indicates the status of the
starter battery:
•
Flashing: the starter battery is below the warning level and must promptly be recharged.
To have it recharged the machine needs to be connected to the 220 V (or 110 V) mains and the circuit
breaker on the electric pump battery charger needs to be switched on.
The battery charger will switch on a green warning light while it is charging the battery and a red warning
light when charging is complete.
Battery charges characteristics; 220 V line
•
Battery charger 12 V 12 A
•
Power supply 185/265 V – 47/62 Hz
•
Operating temperature from -10°C to +40°C
•
Charging curve IUoU
•
Protection against output short circuit
•
Protection against polarity reversal
•
Weight: 1.3 Kg
Battery charges characteristics; 110 V line
(optional)
•
Battery charger 12 V 12 A
•
Power supply 85/264V – 50/60Hz
•
Operating temperature from -10°C to +45°C
•
Charging curve IUoU
•
Protection against output short circuit
•
Protection against polarity reversal
•
Weight: 1.5 Kg
Battery recharging
100
IM R13 T
Advertisement
Table of Contents
