Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Oil level check
The oil level check and any topping up must be performed with the machine stowed away
Check that the oil level remains above the
minimum value; the oil level readout must be in
the middle. Whenever necessary, top up the oil
level with the oil of the same viscosity as
indicated on the tank.
The use conditions of the machine and quality of the hydraulic oil prevent the oil from being replaced at
regular intervals. During checks, verify that oil keeps its clarity, colour and viscosity characteristics;
replace, if necessary.
IMER suggests anyway to replace the oil completely every 3 years.
The complete oil change must be carried out with the machine stowed away
The tap placed under the tank facilitates a total oil drainage.
•
The oil should be drained out of the tank to an appropriate container.
•
Close the drainage tap.
•
Refill with the new oil through the inlet tap.
OIL REFILL
OIL LEVEL
OIL DRAINAGE
110
IM R13 T
Advertisement
Table of Contents
