IMER IM R13 T Use And Maintenance Manual page 73

USE AND MAINTENANCE MANUAL
In order to lift up persons, materials and/or equipment to facilitate the works at some height, it is necessary
to do the following:
1. Put the machine into the working position using the drive and the steering;
2. Have the machine effectively stabilised;
3. Keep on extending the machine's aerial part until the required position has been
reached.
To execute these operations it is necessary to:
• Control the drive and machine stabilisation from the ground platform control panel
• Climb onto the cage
• Have the aerial part extended upwards
Make sure that the red emergency stop button is not pressed down neither on the ground
2
control panel nor on the platform control panel
3
73
IM R13 T