Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
Remote control
The remote control is a wire control system with the same functionality as the radio system, but without
the remote control.
The remote control consists of:
The platform control panel is powered by the serial control cable connected to the central unit. The remote
control model has no batteries for the platform control panel.
A LED and an audible alarm are used to indicate the normal operation, the battery charge status and as
a diagnostic tool for the detection of any malfunction.
For the models with a radio control unit, the platform control panel functions with a battery inserted in
its lower part (see "Battery for platform control panel").
•
a PORTABLE CONTROL UNIT (Platform PANEL) with joystick controls
for proportional control of movements (switches and buttons for ON/
OFF functions, warning lights, graphic LCD).
•
a UNIT RECEIVER
•
a SERIAL CABLE
The platform panel
The portable control unit is sturdy, weather resistant, light and
compact.
The levers and the joystick controls are proportional with spring return
to the center. The platform panel is equipped with an emergency stop
button to stop immediately all the movements.
The joystick controls are surrounded by a frame to protect against
any accidental activation and mechanical damage.
26
IM R13 T
Advertisement
Table of Contents
