Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL
To minimize risks
Follow the instructions below:
•
Avoid the machine knocks against fixed or mobile obstacles.
•
Do not use the machine as a crane with materials suspended to the lifting structures or to the cage.
•
Do not increase the maximum available working height by putting ladders or scaffolds on the platform
or climbing onto the guard rails.
•
Do not place materials on the guard rails.
•
Give the best attention during movements with mobile travelling platform.
•
Carry out the movements only if the working area visibility is complete.
•
Do not use an horizontal force above 400 N.
•
Do not equip the machine with elements (ex. panels) which increase the wind exposure.
Risk of overturning
•
Check the ground is firm and even.
•
Do not use the machine on slippery, icy, muddy ground and with holes,
which has a slope higher than the allowed limit.
•
Keep a distance of at least 2 m from steep unevenness (ditches, steep
terrain, etc.).
•
Check that the ground where the machine has to operate is free from
holes, bumps, drops, uneven level, obstructions, debris and coverings
which could hide possible potholes or others dangers.
•
Comply with the maximum load and the allowable number of persons.
•
Distribute the load on the entire platform surface uniformly.
16
IM R13 T
Advertisement
Table of Contents
