Evaporative Emission Control System; Polishing Of Vehicle - HERO SPLENDOR+ PROGRAMMED FI Manual

Always use unleaded petrol. Even a small
•
amount of leaded petrol can contaminate
the catalyst metals, making the catalytic
converter ineffective.
Keep the engine in good running condition.
•
A poorly running engine can cause the
catalytic converter to overheat.
If your engine is misfiring, backfiring,
•
stalling, or otherwise not running properly,
stop riding and turn "OFF" the engine.
Have your vehicle serviced as soon as
possible.
(1) Catalytic converter
EVAPORATIVE EMISSION CONTROL
SYSTEM
This vehicle is equipped with an evaporative
emission control system to meet emission
standards. During warm weather, the petrol
vapours which contain HC evaporates easily
into the atmosphere from the fuel tank, if the
fuel system is unsealed or open. The
evaporative emission control system is used to
prevent petrol vapours from escaping into the
atmosphere from fuel tank. The canister (1)
collects the fuel vapour from the fuel tank and
then the fuel vapour is drawn into the engine
for re-burning to avoid pollution caused by
the fuel vapour diffused into the air.
(1) Canister

POLISHING OF VEHICLE

After washing your vehicle, wax all painted
surfaces (except matte painted surfaces) using
a commercially available polish/quality liquid
1
or paste wax to finish the job. Use only a non
abrasive polish or wax made specifically for
automobiles. Apply the polish or wax
according to the instructions on the container.
Polishing or waxing is not applicable for
models having matte paint.
54
1
NOTE