HERO SPLENDOR+ PROGRAMMED FI Manual page 51

(1) Air pressure gauge
Inspection
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects.
Look for:
Bumps or bulges in the side of the tyre or
•
the tread. Replace the tyre if you find any
bumps or bulges.
Cuts, splits or cracks in the tyre. Replace the
•
tyre if you can see fabric or cord.
1
Excessive tread wear.
•
Carefully inspect the tyres for any damage,
•
if the vehicle hits a pothole or hard object.
Tread ear w
Replace tyres immediately when the tread
wear indicator (1) appears on the tyre. The
tread limits are:
MINIMUM TREAD DEPTH:
Front: 1.0 mm
Check the tread wear indicator for tyre wear.
1
(1) Wear indicator
48
Rear: 1.0 mm
2
(2) Arrow mark