Engine Oil - HERO SPLENDOR+ PROGRAMMED FI Manual

ENGINE OIL

Use hero genuine engine oil or recommended
grade oil.
BRAND: Hero 4T plus
GRADE: SAE 10W 30 SL Grade
(JASO MA2).
Manufactured by:
Tide Water Oil Co. (India) Ltd.
•
Savita Oil Technologies Limited.
•
Bharat Petroleum Corporation Limited.
•
OIL CAPACITY: 1 litres
Engine oil level inspection/Top up
process
Check engine oil level each day before
operating the vehicle.
The oil level dipstick (1) is on the right
crankcase cover for measuring oil level. Oil
level must be maintained between the upper
(2) and lower (3) level marks on the oil level
dipstick.
UPPER
3
LOWER
1. Oil level dipstick
3. Lower level mark
2. Upper level mark
Do top up if oil level reaches towards the lower
level mark or every 3000 km whichever is
earlier.
Park the vehicle on its main stand.
•
Turn the i3s switch to "OFF" position.
•
Start the engine & let it idle for 3-5
•
minutes.
S top the engine and wait for 2-3 minutes.
•
Remove the oil level dipstick, wipe it clean
•
and insert without screwing it in.
Remove the oil level dipstick and check the
•
oil level.
If required, add the specified oil up to the
•
upper level mark. Do not overfill.
Quantity of oil to be filled is 0.85 litre
•
(approx.) during oil change when right
crankcase cover is not removed.
Reinstall the oil level dipstick and check for
•
oil leaks.
The engine will stall if the i3s switch is in
"ON" position during warmup.
1 Engine oil replacement process/
Oil circulation inspection
Drain engine oil with the engine warm and the
vehicle on its main stand.
2
To drain the oil, remove the oil level dipstick
•
and drain bolt (1) with sealing washer (2).
After the oil has completely drained,
•
reinstall the drain bolt with a new sealing
washer.
31
NOTE