Riding/Braking - HERO SPLENDOR+ PROGRAMMED FI Manual

Find neutral position & check neutral
Ÿ
N indicator (3) on instrument console
with ignition "ON".
Make sure whether the i3s switch (4) is in
•
"ON" or "OFF" position.
(4) i3s switch
Electric start: Press the starter switch with
•
fully closed throttle.
Kick start: Depress the kick starter until
•
resistance is felt. Then let the kick starter
return to the top of its stroke. Kick from the
top of the stroke through to the bottom with
a rapid, continuous motion.
Starting procedure
At any ambient temperature, Press the starter
switch with the throttle completely closed.
4
If you plan to ride your vehicle at an altitude
•
above 2000 meter, consult for advice at
Authorised
Hero MotoCorp
While the vehicle is operated at an altitude
•
above 2000 meter, you may not achieve
sufficient engine performance. Please visit
your Authorised
The engine will not start if the throttle is
•
open because the Electronic control unit
(ECU) cuts-off the fuel supply.
Flooded engine
If the engine fails to start after repeated
attempts, it may be flooded with excess fuel.
Open the throttle fully.
•
Press the starter switch for 5 seconds.
•
Follow the normal starting procedure.
•
If the engine starts with unstable idle,
Ÿ
open the throttle slightly.
If the engine does not start wait for 10
Ÿ
seconds, then follow first 3 step again.
Ignition cut off
Your vehicle is designed to automatically stop
the engine fuel pump, if vehicle falls down. &
(Bank angle sensor cuts off the ignition).
If the vehicle has fallen down, before restarting
the engine you must turn the ignition switch to
"OFF" ( ) position and then back to "ON"
( ) position.
22
NOTE
workshop.
workshop.
Hero MotoCorp
NOTE