Detector Settings; History Menu - Det-Tronics X9800 Addendum
Hart communication with the ir flame detector
Hide thumbs
Also See for X9800:
- Instructions manual (32 pages) ,
- Addendum (16 pages) ,
- Instructions manual (20 pages)
Table of Contents
Advertisement
DETECTOR SETTINGS
This menu shows factory settings relating to relay operation, detector sensitivity, and response.
X9800 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu
1) IR Mode
2) IR Sensitivity
3) Auto o i Enabled
4) Fire Relay (NL/L)
5) Fault Relay (NL/L)
6) Aux Relay (NL/L)
7) Heater Disabled
8) Aux Function
9) Aux IR Function
10) Aux Relay (NE/NDE)
HISTORY MENU
This menu provides historical information about the detector. Up to 32 events in each of the three
categories will be kept in non-volatile memory. When the log is full, the oldest event will be overwritten.
The most recent event will be displayed first.
X9800 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu
1) Alarm Log
2) Fault Log
3) General Log
2.2
Device Info Menu
1) General Info Menu
2) HART Info Menu
3) Status Info Menu
4) Detector Settings
5) History Menu
IR Mode: TDSA and Quick or TDSA only.
Detector IR sensitivity setting: Low, Medium, High, or Very High.
Auto o i enabled. If (Y) an o i test will be conducted periodically without
manual input.
Fire Relay: Latching (L) or Non-Latching (NL).
Fault Relay: Latching (L) or Non-Latching (NL).
Aux Relay: Latching (L) or Non-Latching (NL).
Heater disabled. If (Y) the optics heater is not enabled to prevent
condensation and icing.
Aux function: Pre Alarm or IR Alarm.
Aux IR function: TDSA and Quick or TDSA only.
Aux Relay: Normally Energized (NE) or Normally De-Energized (NDE)
Device Info Menu
1) General Info Menu
2) HART Info Menu
3) Status Info Menu
4) Detector Settings
5) History Menu
Scroll through 32 Alarm Logs with time, date, and temperature stamp.
Scroll through 32 Fault Logs with time, date, and temperature stamp.
Scroll through 32 General Logs with time, date, and temperature stamp.
Detector Settings
1) IR Mode
2) IR Sensitivity
3) Auto Oi Enabled
4) Fire Relay (NL/L)
5) Fault Relay (NL/L)
6) Aux Relay (NL/L)
7) Heater Disabled
8) Aux Function
9) Aux IR Function
10) Aux Relay (NE/NDE)
13
History Menu
1) Alarm Log
2) Fault Log
3) General Log
95-8637
Advertisement
Table of Contents
