Hart Pv Menu - Det-Tronics X9800 Addendum

Hart communication with the ir flame detector
Hide thumbs Also See for X9800:
Table of Contents

Advertisement

HART PV MENU

X9800 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu
1) PV Unit
2) PV
3) PV Sensor Unit
4) PV USL
5) PV LSL
6) PV Minimum Span Not implemented for X9800.
7) PV Damp
8) PV AO
9) PV AO Alarm type
10) PV % Range
11) PV Xfer Function
12) PV Range Unit
13) PV URV
14) PV LRV
15) PV PV Snsr S/N
2.2
Device Info Menu
1) General Info Menu
2) HART Info Menu
3) Status Info Menu
4) Detector Settings
5) History Menu
Not implemented for X9800.
Not implemented for X9800.
Not implemented for X9800.
Not implemented for X9800.
Not implemented for X9800.
Not implemented for X9800.
Analog Output. The value that tracks the Digital Value representation, under
normal operating modes.
Not implemented for X9800.
Percent of Range. The variable that tracks the Digital Value representation with
respect to the range defined by the Lower Range Value and Upper Range
Value, for normal operating modes. The units of this variable are always in
percent.
Not implemented for X9800.
Not implemented for X9800.
Not implemented for X9800.
Not implemented for X9800.
Not implemented for X9800.
HART Info Menu
1) Universal rev
2) Field dev rev
3) Final asmbly num
4) Tag
5) Long tag
6) Date
7) Descriptor
8) Message
9) Num req preams
10) HART PV Menu
11) Condensed Status
8
HART PV Menu
1) PV Unit
2) PV
3) PV Sensor Unit
4) PV USL
5) PV LSL
6) PV Minimum Span
7) PV Damp
8) PV AO
9) PV AO Alarm type
10) PV % Range
11) PV Xfer Function
12) PV Range Unit
13) PV URV
14) PV LRV
15) PV PV Snsr S/N
95-8637

Advertisement

Table of Contents
loading

Table of Contents