Replacing A Memory Module; When To Replace A Memory Module - H3C SR6604 Installation Manual

Figure 84 Loosening the captive screws of the air filter
Gently pull the air filter out along the slide rails.
2.
Figure 85 Pulling the air filter out along the slide rails
Install a new air filter. For more information, see
3.

Replacing a memory module

The RPE-X1s and FIPs are equipped with memory modules. Before installing or removing a memory
module, remove the RPE-X1 or FIP from the chassis first. For more information, see
MPU," "Replacing an RSE-X1

When to replace a memory module

CAUTION:
• Use the memory modules provided by H3C only. Otherwise, the router might be unable to
operate correctly.
• For all the MPUs and service modules, except RPE-X1 MPU, memory modules with the same
capacity must be used in pairs, for the specifications of memory modules supported, see
"Appendix A Chassis views and technical
Memory modules are removable components of the router.
You need to replace a memory module in the following situations:
•
More memory is needed to upgrade the application program.
MPU," and "Replacing a FIP
specifications."
75
"Installing an air filter."
module."
"Replacing an