Mpus; Rpe-X1 - H3C SR6604 Installation Manual

Table 30 Fan tray specifications
Fan (built-in)
Rated voltage
Automatic fan speed
adjustment
Dimensions (H × W × D)
Failsafe
Hot swapping

MPUs

A main processing unit (MPU) calculates routes, manages the FIB, supervises and controls the
system, and provides a precise system clock and the real time clock (RTC) function.
The RPE-X1, RPE-X3, RPE-X5, RPE-X5E, RSE-X1, MCP-X1, and MCP-X2 MPUs are available for
the router. You can select them as needed.
If you order an RPE-X1, RPE-X3, RPE-X5, or RPE-X5E MPU, you must also order a compatible
carrier. For
RPE-X1/RPE-X3/RPE-X5/RPE-X5E

RPE-X1

Figure 111 RPE-X1 MPU
(1) Reset button (RESET)
(3) Active/Standby LED (ACT)
(5) LINK/ACT LED for the Ethernet management port
(7) Console port (CONSOLE)
(9) Host-mode USB port 0 (0)
(11) USB 1 LED
(13) CF card
Specification
SR6604
12 VDC
Supported
136.4 × 31 × 427.8 mm (5.37 ×1.22 ×
16.84 in)
Supported
Supported
the MPU carrier
MPU."
installation procedure,
(2) RUN LED
(4) Alarm LED (ALM)
(6) Management Ethernet port (MANAGEMENT)
(8) AUX port (AUX)
(10) Device-mode USB port 1 (1)
(12) CF card LED
(14) CF card button
104
SR6608
228 × 31 × 413.3 mm (8.98 ×1.22 ×
16.27 in)
see "Installing an