Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 50

4. Component Expansion/Function Enhancement
Installing Additional Drive Enclosures
(7)
Attach the flange cover.
• High-density drive enclosure (for regions other than the EMEIA, Central American, and Caribbean
regions)
(1)
Adjust the sizes of the rack rail (for left side) and the rack rail (for right side) to fit the rack.
Pull the rail lock lever in the direction of the arrow and unlock it to adjust the length of the rack
rails to match the distance between the front and the rear rack pillars. Leave the rail lock lever
unlocked because the rail lock lever is locked after the rack rail is installed.
(Rack pillar: front)
Rail lock lever
Unlock the levers to adjust the length of the
rack rails to match the distance between the
front and rear rack pillars.
[Left]
[Right]
Rack rail (left)
"Left" is on the exterior
Rack rail (right)
"Right" is on the exterior
50
(Rack pillar: rear)
Operation Guide (Basic)