Fujitsu ETERNUS DX S5 Series Operation Manual (Basic page 36

4. Component Expansion/Function Enhancement
Installing Additional Drives
5
To install more additional drives, repeat
6
If a wrist strap is used, remove the wrist strap.
7
In the [Drives] screen of [Component] on the ETERNUS Web GUI screen, check that the added drives have
been recognized.
8
Set up RAID groups, volumes, hot spares, and host affinity settings, as required.
■
For 3.5" Drives
1
In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of
the ETERNUS DX are in normal status.
2
Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
3
Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
IMPORTANT
Keep the removed dummy drive units in a safe place where they will not be lost.
4
Install the new drive.
(1)
Press the catch on the drive lock lever to unlock it.
Catch
Tab
Lock lever
Step 3 and Step 4.
Dummy drive unit
36 Operation Guide (Basic)